One of the most powerful centrifuges in its class, the FX spins at 3,400 rpm and is extremely quiet. All PowerSpinT models have a timer, on/off switch, maintenance-free brushless motors and other features normally found on more expensive centrifuges. Unit size: 10.2" x 11.8" x 7.9". Weighs 16lbs.

Features:

• Six place angled rotor
• Fixed speed control
• Stainless steel rotor chamber is easily accessible for cleaning and disinfection
• Suction cup rubber feet for stability while reducing vibration
• Detachable power cord
• Easy clean exterior
• Lid opening for strobe check of speed
• Latching Lid with safety switch triggered to shut down the power when the lid is opened
• Light indicator is lit when the power is on
• Standard 115V/60Hz input
• Speed range: 3400 rpm, fixed
• Maximum RFC (g): 1350
• Nominal capacity: 6 x 10mL
• AC Motor
• Maximum test tube size: 16 x 110mm

The Rock-ITT Tube Rocker is one of the most utilized tools for the laboratory. L-TTR200 is a heavy duty, almost silent mixer designed for years of everyday use. It has a capacity of 15 tubes or mix of tubes and vials with a speed of 25 rocking cycles per minute. The tube pad is reversible and autoclavable.

H600 Series Clinical Laboratory, advanced and versatile compound microscopes are able to perform all the intricate and varied functions of microscopes costing thousands of dollars more. H600 series has greater potential for research, education, and medical applications with the addition of new "high-power" accessories.

UNICO M250 Series designed for college level instruction and discovery.
Features:

• Binocular Head
• 10x WF (2) Eyepiece
• Objectives 4, 10, 40, 100x
• Condenser NA1.25
• Iris Diaphragm
• Mechanical Stage
• Illumination Halogen
• 6 Volt/20 Watt Bulb
• Focusing Coaxil

These heavy-duty, rupture-resistant bags are red with printed biohazard symbols. Bags exceed regulatory standards. 20-gallon bags measure 25" x 34", and 30-gallon bags measure 30 1/2" x 41".

For precise in-office culture tests, incubator maintains a temperature stability to 60degrees C. The outer shell is steel and the inner chamber is aluminum with 2 adjustable, nickel-plated shelves and a clear, plexiglas door for easy observation of test progress. Overall dimensions 13"W x 14"D x 16 1/4"H. Chamber dimensions 11 1/2"W x 12"D x 10 1/2"H.

Transfer Pipettes are made from low density polyethylene. Chemically inert and non-toxic. 6" length, bulb draw 3.2mL, 22 drops per mL, graduations to 3mL.

Made from finest sheet glass. Individually selected for uniform quality. Precision-ground edges on all four sides. Annealed to minimize chipping and breakage. Thin, flat, resistant to corrosion or fogging. Dispensing package allows easy removal of slides. Packaged with paper in between each slide to protect. Available in plain or frosted.

Made of borisilicate glass without marking spot with correct wall thickness for maximum service. 10mL, 13 x 100mm.

Moore Medical brand, 100% synthetic, powder-free nitrile glove. Blue color, textured.

• Specifications: Palm Width, 84 (+/- 3) mm
• Length minimum 240mm
• Thickness: Finger - 0.16mm (+/- .03); Palm - 0.14mm (+/- .03); Cuff - 0.10mm (+/- .03)
• Meets or exceeds all ASTM and AQL 2.5 Patient Exam standards